© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
50
CHASSIS
Headway Monitoring
and Warning
Displays the amount of time, in seconds, to the vehicle in front when that
time becomes 2.5 seconds or less.
Green vehicle icon signifies safe headway; icon becomes red when
headway time is 0.6 seconds or less.
Note: If numbers appear dim that is an indication of low visibility
conditions (bad weather, direct sunlight, dirt on windshield, etc.). System
continues to work but there may be diminished detection ability.
To Adjust Mobileye System,
please refer to settings menus
Available levels: 0.1-2.5 seconds.
Pedestrian Collision
Warning
Pedestrian Detection
Warning
Red pedestrian icon warns of an imminent collision with a pedestrian or
bicyclist.
Operational during daylight hours only. Active under 31 MPH.
Green pedestrian icon appears in area defined as the “Danger Zone”.
Time to collision is not critical, no audio alert.
This alert cannot be adjusted or
disabled.
Intelligent High-Beam
Control (Optional)
Automatically turns the high-beams on/o
ff
depending upon the level of
light and relative distance from other tra
ffi
c.
Green icon signifies the control is enabled.
Blue icon signifies the feature is active.
Active above 21 MPH.
To adjust Mobileye System,
please refer to settings menus.
0 = OFF; 1 = ON
Speed Limit Sign
(Optional)
Speed Limit Sign flashes when vehicle exceeds speed limit.
Detected speed limit sign is shown as a large icon for one second, then
minimizes and is shown as last posted speed sign. Vehicle’s current
speed can be displayed in upper right hand corner (optional feature).
Last known Speed Limit Sign can be displayed in upper left hand corner
(optional feature).
To adjust Mobileye System,
please refer to settings menus
There are 6 available levels.
OnGuard Collision Mitigation System Operation
This article provides brief operation instructions for an OnGuard Collision Mitigation System.
WABCO’s OnGuard ACTIVE is a radar-based active
safety system that o
ff
ers Adaptive Cruise Control,
Forward Collision Warning and Collision Mitigation.
OnGuard ACTIVE detects objects ahead and measures
the vehicle’s position and speed in relation to other
vehicles on the road to warn the driver of a possible
collision by providing audible, visual and haptic
warnings. The system will apply the brakes to reduce the
risks and severity of rear-end collisions.
OnGuard ACTIVE is not intended to replace driver
control of the vehicle at any time. You, as the driver,
remain in control of your vehicle and determine the
actions that are necessary for safe operation.
Overview
Adaptive Cruise Control (ACC) automatically adjusts
the speed of your vehicle while in cruise control and
attempts to maintain a set following interval of 3.6
seconds when there is a vehicle ahead. ACC works
with conventional cruise control to maintain the set
cruise speed when the lane ahead is clear and will
automatically adjust the vehicle’s speed to maintain the
set following interval when a vehicle ahead is detected.
Adaptive Cruse Control
For more information, contact Mobileye at (877) 867-4900.
Source(s): XiteSolutions Mobileye Quick Reference Guide (V. 20190122.01)
Product(s): This source is associated with more than one product. Refer to Newgle for more information about the product(s) o
ff
ered for your coach’s
model year.
Содержание London Aire 2021
Страница 1: ...2021 sm...