© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
121
ENTERTAINMENT SYSTEMS
23.
D.ZOOM
: Press this button during normal zoom in or
zoom out playback mode. This player can magnify a
picture at three levels. Press this button to magnify
picture and use the “four-directional arrow” button to
select desired part of the zoomed picture.
24.
PBC
: Press this button to return to the menu of the
disc and play the disc from the first track.
25.
VOL +/-
: Press these buttons to increase or decrease
the volume.
26.
CH+ / CH-
: Press these buttons to select channels in
ascending or descending order.
27.
CH.LIST
: Press this button to display the channel list
in TV mode.
28.
STOP
(
■
): When this button is pressed once, the
unit records the stopped point from where playback
will resume (resume function) if PLAY is pressed
afterwards. But if STOP button is pressed again
instead of the PLAY button, there will be no resume
function.
29.
B.MARK
: When playing DVD disc, press this key to
mark the place where you want to replay again.
30.
RANDOM
(DVD ONLY)
: Random mode allows you
to play tracks randomly by pressing this button.
Pressing again will cancel random playback.
31.
NUMBER (0-9)
: Enter digits for channel selection or
password setting.
32.
BLACK DOT
: For sub-channel selection.
33.
AV/TV/DVD
: Press this button to display the input
source. Using UP/DOWN button to select and RIGHT
or ENTER button to confirm.
34.
A-B REPEAT (REP A-B)
: You can repeatedly play a
given portion by operating as follows:
•
Press this button once to define the portion head
(start).
•
Press this button again to define the portion toe
(end).
•
Then the portion will be played repeatedly.
•
Press this button again to return to normal playback.
35.
CLEAR
: Press this button to cancel the numbers you
input, just like an eraser.
36.
REPEAT
: Press this button to repeatedly play a
chapter (DVD). You can repeatedly play a title (DVD).
You can also repeatedly play the whole disc (DVD)
and cancel the repeat function.
37.
ANGLE
: Some DVDs contain several scenes taken
at the same time in di
ff
erent angles. Press this key
to select a di
ff
erent angle (if the disc supports this
function).
If an universal remote is used to control this TV,
please program the universal remote using the Philips
code.
NOTICE
!
Basic Operation
TURNING THE TV ON OR OFF
1. After attaching cable to either an antenna or a cable
service, insert the power cord plug into a polarize AC
outlet.
2. Press the POWER button on the LED TV.
3. The normal picture will be displayed on the screen
after six seconds. If no signal, “No Signal” will display
on the screen.
4. If temporary POWER of is required, press the POWER
button on the LED TV.
5. If you want to completely switch o
ff
the power for this
unit, unplug the power cord plug.
6. After switching o
ff
the unit, you should turn on the TV
again at least five seconds later.
STATUS INDICATION LAMP
1. Green: In power on mode.
2. Red: In standby mode.
AUTO POWER OFF
If there is no signal input in any mode, the TV
will automatically access the standby state after
approximately 15 minutes.
MEMORY BEFORE TURNING TV OFF
The settings of picture and the preset channels will be
memorized at turning o
ff
the unit. When it is started up
again, the unit will work according to the mode set before
being turned o
ff
.
DVD OPERATION
1. Press the Eject (
▲
) button on the
side panel or on the remote.
2. After placing a disc in the disc tray,
press the
⊲
||
button to play the disk,
and press the
⊲
||
button twice to
pause the disk.
Source(s): Skyworth LED HD TV/DVD Combo User’s Manual
Product(s): Skyworth 19” LED HDT TV/DVD Combo (Model: SLC-1921A-
3S, Newmar Part Number: 145572)
Содержание London Aire 2021
Страница 1: ...2021 sm...