NewMar London Aire 2021, Руководство пользователя

Страница: 158 / 204

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
153
INTERIOR
If you write down your combination, you must keep
this information in a secure place, away from children,
not inside the safe.
IMPORTANT
!
Locking The Safe
To lock the safe, close the door and turn the knob to the
left to the 12:00 position.
Internal LED Light
This safe includes an internal LED light that will activate
when the correct combination is entered and will remain
on for 30 seconds.
Battery Replacement
This safe uses 4 - AA batteries. Under normal use,
batteries will last about 1 year.
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard or rechargeable
batteries.
If the batteries are low, the yellow light will flash when
you start to enter your code. To replace the batteries,
open the battery compartment on the back of the door by
pushing the tab in the direction of the arrow and install all
new batteries.
Turning The Keypad Sound
Off/On
Your safe comes with the “Beep” sound turned on. You
can turn o ff the “Beep” sound of the keypad by pressing
the Volume key. To turn the “Beep” sound on, press the
Volume key again.
Product(s): Stack-On PWS-1822-E Security Wall Safe Owner’s
Manual(Model: PWS-1822-E, Newmar Part Number: 144484)
When you open the safe in the future, enter the security
code you have set, followed by the checkmark yet, and
turn the knob.
If an incorrect security code is entered 3 times, the safe
will beep 5 times (if the sound is turned on) and the
red light will flash 5 times resulting in the safe being
automatically locked out for 60 seconds before you can
try your code again. The safe will beep one time (if the
sound is turned on) and the green light will flash once
when the lockout period is over.
If an incorrect security code is entered 1 additional time,
the safe will beep 5 times (if the sound is turned on) and
the red light will flash 5 times, resulting in the safe being
automatically locked out for 5 minutes before the code
can be tried again. The safe will beep one time (if the
sound is turned on) and the green light will flash once
when the lockout period is over.
Shades and Window Coverings
Shade Operation via KIB LCD Touchscreen
This article provides brief operating instructions for a KIB LCD touchscreen.
Overview
Touch the inactive (blank) screen to activate and display
the Lighting screen. Once the panel becomes inactive
and times out, it will default back to the blank screen.
Touch the Home icon to reveal the Home Menu page,
which may include buttons for lighting, shades, fans,
systems, or display brightness controls, as well as as icon
in the upper right corner for More Information (i). Once a
button is touched, it will turn red, indicating the circuit is
active. The buttons are gray while the circuit is inactive.
Shades
Touch the SHADES button,
followed by the corresponding
shade button to start and stop
shade operation. Once a button
is touched, it will turn red,
indicating the circuit is in active
operation. The buttons are gray
while the circuit is inactive.
The available buttons will vary
by coach model and floorplan,
as well as installed options.
Potential buttons may include,
but are not limited to:
•
DOOR DAY SHADE
•
DOOR NIGHT SHADE
•
DINETTE DAY SHADE
•
DINETTE NIGHT
SHADE
•
ALL DAY SHADES
•
ALL NIGHT SHADES