Data Exchange with Computer
69
Step 7. The dialog box with the list of the devices (Fig. 45) will appear on the screen.
Choose
Neuro-Audio-Screen
screening system and press the “Connect” button. The
computer will connect the screening system and you will have a new session.
Fig. 45. Device connection with the computer. Step 7.
7.2. Operation with Neuro-Audio-Screen Manager
Software
The
Neuro-Audio-Screen
and
Neuro-Audio-Screen/OAE
screening systems are
supplied with the
Neuro-Audio-Screen Manager
software. It can function properly on
any IBM compatible computer with
Intel Pentium Celeron 1 GHz
(
Intel Pentium IV
is
recommended) processor and under control of
Windows XP/Vista/7
operating
system. For the software setup there should be 1 Gb of free hard disk space and not
less than 20 Mb of free hard disk space for the exam archive. In case of operation
under control of
Windows XP
,
the installed
.NET Framework 2.0
component or
higher should be available. The Bluetooth adapter either built-in or external should be
connected to the computer.
As soon as you made a connection with the device, you can control the list of patients
stored in the device and also transfer the data of the already executed exams to the
computer. The
Neuro-Audio-Screen Manager
software is intended for this purpose
(further “the software”).
Connect the computer to
Neuro-Audio-Screen
screening system as described in
p. 7.1.
To start the operation with the program, first install it from the disk included in the
screening system delivery set.