Hearing Screening Systems (Technical Manual)
60
“Change” button. After that the window represented in the Fig. 35 will appear. Switch
the template using “right” and “left” arrow buttons.
Please pay attention that the default templates can not be changed and/or removed.
To add the template, press “New” button, enter the name of a new template and set it
up. If you want to remove the template, press “Delete” button.
Fig. 35. The window of ABR technique parameters setting.
To change the settings in your template, select the required setting using “up” and
“down” arrow buttons and change the value by 1 unit by pressing the arrow buttons
“left” (-1) and “right” (+1) or by 10 units by pressing “-10” and “+10” buttons.
If you want to set the standard settings, press the “Standard” button. The dialog box
with the request concerning the default settings setup will appear on the screen. Press
“Yes” button to set them or “No” button to cancel. If you press “Yes” button, the
standard settings will be set only for ABR test.
After finishing the settings change, press “Close” button, at that the dialog box with the
request concerning the confirmation to save the changes made in ABR settings will
appear. To save the changes, press “Yes” button, to exit without saving of the
changes, press “No” button.
6.5. System Settings
System settings include the following:
Sensitivity, mV/Pa. The change range – from 5 up to 50.
Printer type – SPRINT or UPS.
Address – the address of the printer.
