NTI VEEMUX DVI VIDEO MATRIX SWITCH
44
Update Firmware
From the Administration menu, the Update Firmware page can be displayed. The Update Firmware page shows the current
version of the firmware and enables the Administrator to update the firmware to the latest version available.
Figure 27- Update Firmware page
WARNING: Failure to carefully follow these directions can permanently damage the VEEMUX. Please read these
directions in full before continuing. Do not, under any circumstances, reset or power-down the VEEMUX while the
firmware is being updated. Do not attempt to update the firmware if a power-failure is likely.
Note: The Firmware can only be updated from the non-secure (http) website. If you attempt to access this page from the
secure (https) website, you will be automatically redirected to the non-secure site.
To update the firmware:
1.
Contact NTI for the latest firmware file name
veemux-dvi-vx-x.bin
(where x.x is the version number)
and copy it to your computer.
2.
On the Update Firmware page, in the “Update File” block, browse to the firmware file.
3.
Press
Upgrade
.
Note: If an update is attempted using the wrong firmware for the section an error message will be received. No update
will occur.
4.
The VEEMUX will upload the firmware and then restart itself (this may take up to 4 minutes), logging out all
connections. After the restart, approximately 4 more minutes, the VEEMUX will be ready to resume
operation.
If a message appears stating that the Upload has failed, or that a non-fatal error has occurred:
1. Ensure that the file being uploaded is the NTI firmware file.
2. Repeat the process from step 2 above.
Note: The following message does not indicate that damage to the product has occurred.
If a message appears stating that there has been a fatal error:
1.
DO NOT RESET OR POWER-DOWN THE VEEMUX
.
2. Repeat the update process from the first step 2 above.
3. If you get another Fatal Error message, call NTI tech-support at 1-800-742-8324 or 330-
562-7070.
FYI: The VEEMUX should continue to run normally unless it is reset. However, damage may have occurred
to the web server firmware that will prevent the product from starting up correctly.
Note Version Number Here
Содержание VEEMUX SM-nXm-DVI-LCD
Страница 5: ...iv...
