Network Technologies VEEMUX SM-nXm-DVI-LCD, Инструкция по установке и эксплуатации

Страница: 35 / 61

NTI VEEMUX DVI VIDEO MATRIX SWITCH
30
AV- Set Audio Volume for Output Port
Command:
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 Byte 9
‘A’
(0x41)
‘V’
(0x65)
Space
(0x20)
Output – 1st digit
(0x30 … 0x32)
Output – 2nd digit
(0x30 … 0x39)
‘,’
(0x2C)
Volume – 1st
digit
(0x30 … 0x32)
Volume – 2nd
digit
(0x30 … 0x39)
<CR>
(0x0D)
Response:
Byte 1 Byte 2
‘
∗
’
(0x2A)
<CR>
(0x0D)
This command sets the volume specified audio output port to the specified level (00 – 99).
AM- Mute/Unmute Audio Output Port
Command:
Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 Byte 9
‘A’
(0x41)
‘M’
(0x4D)
Space
(0x20)
Output – 1st digit
(0x30 … 0x32)
Output – 2nd digit
(0x30 … 0x39)
‘,’
(0x2C)
‘0’
(0x30)
Mute Status
(0x30 or 0x31)
<CR>
(0x0D)
Response:
Byte 1 Byte 2
‘
∗
’
(0x2A)
<CR>
(0x0D)
This command sets or clears the mute status of the specified audio output port. A mute status of 00 indicates that the port is not
muted, while a status of 01 indicates that the port is muted.
Terminate telnet session
Command:
Byte 1 Byte 2 Byte 3
‘X’
(0x58)
‘X’
(0x58)
<CR>
(0x0D)
Response:
Byte 1 Byte 2
‘
∗
’
(0x2A)
<CR>
(0x0D)
The unit will respond with
‘ * ’ <CR> and close the connection, terminating the telnet session. The unit is then available for future
connections.