Network Security QGSA-5120-A1, Руководство пользователя

Страница: 41 / 64

Scanner Appliance Tour
Split Network Configuration
41
4
Review the confirmation message. When the SCANNER APPLIANCE NAME–IP
ADDRESS appears you are ready to start scanning. If another message appears you
need to complete the Quick Start or resolve the error indicated.
Enable Static IP on the WAN Interface
To configure the WAN interface with a static IP address, follow these steps:
1
Select
SETUP NETWORK
, press the Down arrow until the
ENABLE WAN INTERFACE
menu option appears. Then press ENTER to continue.
2
Go to the ENABLE STATIC IP ON WAN menu option and press ENTER to continue.
3
When the
CFG WAN STATIC NETWORK PARAMS?
prompt appears, press ENTER to
continue. Or press the Up arrow to quit this procedure and return to the
SETUP NETWORK
menu option.
4
When the WAN IP ADDR prompt appears, enter the static IP address, and then
press ENTER to continue.
5
When the
WAN NETMASK
prompt appears, use the Up and Down arrows to scroll to
the desired netmask value. After selecting a netmask value, press ENTER to
continue.
6
When the WAN GATEWAY prompt appears, enter the gateway IP address. Then press
ENTER to continue.
7
When the
WAN DNS1
prompt appears, enter the IP address for the primary DNS.
Then press ENTER to continue.
8
When the WAN DNS2 prompt appears, enter the IP address for the secondary DNS.
This entry is optional. Press ENTER to continue.
9
When the
REALLY SET WAN STATIC NETWORK?
prompt appears, press ENTER to
continue. Or press the Up arrow to quit this procedure and return to the
SETUP NETWORK
menu option.
10
Review the confirmation message. When the SCANNER APPLIANCE NAME–IP
ADDRESS message appears, you are ready to start scanning. If another message
appears you need to complete the Quick Start or resolve the error indicated.