NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
15
2.6 Terminal Block and DIN-Rail mount installation
This section describes how to install the Terminal Block and DIN-Rail to the router, if you do not install the DIN-Rail, please paste
the 4 rubber feet at the bottom of the hulled to avoid scratches of metal housing.
Take out the “2pin / 6pin terminal block” from inside the accessory kit, and install to the router properly.
(Figure 2.6.1)
Please refer to install the DIN-RAIL as following step:
1. Install the DIN-Rail mounting plate to the NV-600WI.
(Figure 2.6.2)
2. Please use the suitable DIN-Rail to install, please refer to the dimensions of the DIN-Rail.(
Figure 2.6.3
)
3. Insert the top of the DIN-Rail into the top slots on the DIN-Rail mounting plate and the DIN-Rail mounting plate will snap into
place.
(Figure 2.6.4)
Figure 2.6.1
Figure 2.6.2
Figure 2.6.3
Figure 2.6.4
