NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
189
The screen contains the following details:
Fields in QoS Settings:
Field
Description
Active WAN mode
Informative Parameter to show current WAN mode being used.
QoS
Enable
This selection will enable the QoS feature.
Disable
This selection will disable the QoS feature.
Upstream QoS
Enable
This selection will enable the upstream QoS.
Disable
This selection will disable the upstream QoS.
Downstream QoS
Enable
This selection will enable the downstream QoS.
Disable
This selection will disable the downstream QoS.
8021P Remarking
Enable/Disable
This will enable/disable global 8021P Remarking.
Upstream Default DSCP
Marking
Default DSCP Marking for non-classified packets. By default it is “No Change” for
these non-classified (default) traffic flows.
WAN Port Rate Limiter
Check-box for limiting physical port rate limit on WAN upstream link.
PPA Session Acceleration Setting
PPA Session
Acceleration
Hardware Acceleration based on Protocol Processing Engine (PPE) of Lantiq.
To enable/disable the session acceleration feature.
Click
Apply
for applying the QoS setting changes into system.
Click
Cancel
to exit from this page without saving the changes.
