NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
156
Fields in “Add a Packet Filtering Rule” page:
Field
Description
Protocol
To select the protocol. The options available are ALL, TCP, UDP, ICMP, AH and ESP.
Source IP
The source IP can be a SINGLE address or a SUBNET, involving a range of IP addresses.
IP Address
To specify the source IP address.
Netmask
To specify the Netmask for the source address.
Source Port
To specify the range of the source port. Valid for protocols TCP or UDP only.
Destination IP Type
The destination IP can be a SINGLE address or a SUBNET or All involving a range of IP
addresses.
IP Address
To specify the destination IP address.
Netmask
To specify a Netmask for the destination IP address.
Destination Port
To specify the range of the destination port. Valid for protocols TCP or UDP only.
Ingress Interface
To specify the input interface of the packet from dropdown options. (e.g. WAN1).
Egress Interface
To specify the output interface of the packet from dropdown options. (e.g. WAN2).
Source MAC Address
This is the source host’s MAC address.
Enable
To enable/disable the particular packet filtering rule.
Click
Apply
at any time during configuration to for adding the packet filtering rule.
Click
Cancel
to exit from this page without saving the changes.
