NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
23
Table 3-2
Description of the router connectors
Connectors
Type
Description
Reset
Reset Button
The reset button allows users to reboot the VDSL2 or load the default
settings.
Press and hold for 1-5 seconds: Reboot the VDSL2 Router
Press over 5 seconds: Load the default settings
Line
RJ-11/Terminal Block
For connecting to a VDSL2 device. (
Do not
use RJ11 and Terminal
Block at the same time.)
Gigabit Ethernet
(E1-E4)
RJ-45
For connecting an Ethernet equipped device.
Link (WAN)
RJ-11/Terminal Block
Allows data communication between the router and the VDSL2
network. (
Do not
use RJ11 and Terminal Block at the same time.)
WPS
WPS Button
Press this button to make a network connection through WPS
(
WPS
function is only supported on windows 7 or above operating systems
).
Every time the user presses the WPS button, there will be two minutes
of time to detect the available equipment.
Notes:
1. It is normal for the connection between two Routers to take up to 3 minutes, due to NV-600L/W to establish a link mechanism in
auto-negotiation, that detects and calculates CO and CPE both PBO and PSD level, noise levels and other arguments for getting
a better connection.
2.
Every time the user presses the WPS button, there will be two minutes of time to detect the available equipment. If the WPS
function does not detect the device, the WPS light will turn off.
