NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
85
Figure 4.6.5.2 WAN Settings – Apply – Step1
The screen contains the following details:
Fields in WAN Settings – Apply – Step1:
Field
Description
Attached Channel
Select the WAN Channel (e.g. PVC) from drop-down, being configured as WAN.
Dynamic IP Address
To get your IP Address from your service provider (means NV-600WI is DHCP client
on WAN) click
Apply
.
Static IP Address
To enter the WAN interface IP Address of NV-600WI enable this field and click
Apply
.
PPPoE
Point-to-Point Protocol over Ethernet used for connecting to the ISP, click
Apply
.
PPPoA
Point-to-Point Protocol over ATM used for connecting to the ISP, click
Apply
. This
setting is applicable only for ATM WAN mode.
Bridge
To configure the WAN of bridged type, select this field and click
Apply
.
Click
Apply
at any time during configuration to save the information that you have entered.
Click
Cancel
to exit from this page without saving the changes.