NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
242
7. Question:
I just bought a Netsys NV-600WI to replace my Quest DSL modem for my company. I was told any
VDSL2 modem would work and give me higher communication speeds. It doesn’t get me internet
when hooked up. All lights come on but no Link light. Is this the complete wrong application for this
unit?
Answer:
Please note NV-600WI is a remote side (CPE side), it must be connected to the CO side to work.
Tone mode, Band profile and band plan settings must be compatible with each other, if not; access
error will show when applied. Please deactivate and activate once the settings have been changed.
8. Question:
We need to set up a default gateway on a NV-600 pair which is in Bridge mode, as they want to
manage the units from a different network.
Answer:
When the application is used within the LAN, the switch (bridged) mode is not necessary to set up a
gateway .However, if the application crosses various network segments (LAN to WAN or WAN to
LAN), you must set up a gateway to connect a different network segment.
Regarding on how to configure a default gateway at switch (bridged) mode for crossing various
network segments, please refer to the section 4.8.1 for your reference.
Example for configuring the gateway from static routing:
Destination LAN IP:
0-0-0-0
Subnet Mask:
0-0-0-0
Gateway:
255-255-255-0
Note:
Static Routing functionality is used to define the connected Gateway between the LAN and
WAN.
