Netscout OneTouch AT G2 Скачать руководство пользователя страница 354

Страница: 354 / 396

OneTouch AT and OneTouch AT G2

User Manual

338

The CAPTURE FILENAME screen is displayed.

By default, the capture file name format is



pcap–<date><time>.pcap

You can use the keyboard to change the capture file name if
desired. The .pcap extension cannot be changed.

Tap the

DONE

button. The AutoTest capture file is saved on

the SD card.

Wired and Wi-Fi results are merged into a single capture file.

The AutoTest capture file size is limited to 32 MB per wired or



Wi-Fi interface, or 64 MB if both wired and Wi-Fi interfaces are
used.

AutoTest capture may impact User Test performance if User Tests
generate a high volume of network traffic.

AutoTest ends when the last user test completes, before wired
analysis begins.

Note

Wi-Fi packets are received as 802.11 data frames. In

Wi-Fi capture, the 802.11 header is removed. 802.11

management and control frames are not captured.

Managing Capture Files

Captures are stored as .cap files on the SD card. You can view the
list of captured files as follows:

After stopping the capture, tap the back button

Tap the

CAPTURE FILES

button

The list of capture files is displayed. You can use the buttons at
the bottom of the screen to delete or rename capture files.

To move or copy capture files to a PC, eject the SD card and insert
it in the PC. Or see “Managing Files” on

page 341.

Содержание OneTouch AT G2













































































































































































































































































































































































































Результаты поиска

Содержание OneTouch AT G2

Отзывы:

Netscout OneTouch AT G2, Руководство пользователя, Страница: 354 / 396

Результаты поиска

Содержание OneTouch AT G2

Отзывы: