Netscout OneTouch AT G2, Руководство пользователя

Страница: 292 / 396

OneTouch AT and OneTouch AT G2
User Manual
276
The Wi-Fi NETWORK VALIDATION RESULTS tab displays Signal
and Noise measurements as well as Layer 3 and Wi-Fi Layer 2 test
metrics.

SSID - The name of the network on which the Wi-Fi connection
was established during the test.

Location: This is the location name from which you should be
running this test.

BSSID - This row shows the Access Point manufacturer and
BSSID.

AP Name - This is the AP’s name.

Connection Status - This shows whether the OneTouch was able
to establish a connection with the AP, and if connected,
indicates the current and maximum transmit rates, as

current/max Mbps.

The Signal and Noise graph gives you an indication of the
access point’s coverage and the signal quality for the duration
of the performance test.
The upper line on this graph shows signal strength on a scale
of 0 to -100 dBm.

Signal values greater than -75 dBm are shown in a green
box, indicating a strong signal.

Signal values less than or equal to -75 dBm are shown in a
yellow box, indicating a marginal or weak signal.
The lower line on the graph shows the noise level of the chan-
nels the AP is using.

Noise values less than or equal to -80 dBm are shown in a
green box, indicating a low noise level.

Noise values greater than -80 dBm are shown in a yellow
box, indicating a noisy environment.

This is the security type used when connecting to the BSSID.

This is the channel on which the BSSID is operating.