manualshive.com logo in svg

Netscout OneTouch AT G2, Руководство пользователя, Страница: 173 / 396

Поделиться
Скачать
Netscout OneTouch AT G2 Скачать руководство пользователя страница 173

Chapter 5: User Tests

Video (RTSP) Test

157

IPv6 address or named server. The test verifies the ability to 
playback the specified media file from the server using the 
designated Port.

Configuration

Server

 - Enter the URL or the IP address of the target server. See 

also: “Server” on 

page 105

.

The 

Name

 button allows you to assign a custom name to the test. 

See also: “Name” on 

page 105

.

Transfer Size

 and 

Time Limit

 - The test will end when the selected 

Transfer Size has been streamed or when the time limit has been 
reached. 

If the Transfer Size has been streamed before the Time Limit is 

reached, the test will pass. 

If the Transfer Size has not been streamed before the Time 

Limit is reached, the test will fail. 

If the Transfer Size is 

All

, the test will run until the time limit is 

reached or until the entire stream is received, and the test will 

pass.

If the stream is interrupted, the test will fail.

Port

 specifies the port on which RTSP communication will be 

established. RTP is automatically set up using port 1386 for Data 
and 1387 for Control.

File

 is the name of the file that will be received (streamed).

How it Works

The OneTouch analyzer requests a session with the RTSP server. 
The file specified on the 

File

 button is streamed to the OneTouch 

analyzer. The amount of data streamed is checked against the 
specified Transfer Size and Time Limit to determine whether the 
test passed or failed. The streamed file is not saved. 

Содержание OneTouch AT G2













































































































































































































































































































































































































Отзывы:

Нет отзывов