background image

Manage Your Network 

81

 N300 WiFi Router

Allow guests to see each other and to access my local network

. If this feature is 

on, anyone who connects to this SSID has access to your local network, not just 
Internet access. 

Reboot the Router

Rebooting the router disconnects all computers and mobile devices from the router’s 
network.

To reboot the router:

1. 

Launch a web browser from a computer or wireless device that is connected to the 

network.

2. 

In the address field of the web browser, enter 

www.routerlogin.net 

or 

www.routerlogin.com

.

A login screen displays.

3. 

Enter the router user name and password.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

The BASIC Home screen displays.

4. 

Select 

ADVANCED

.

5. 

In the Router Information pane, click the 

Reboot

 button.

A confirmation message displays.

6. 

Click the 

OK

 button.

The router reboots.

View Logs of Router Activity

The log is a detailed record of the websites you accessed or attempted to access. Up to 
256

 

entries are stored in the log. Log entries display only when keyword blocking is enabled. 

No log entries are made for the trusted LAN client.

Содержание N300 WNR2000v5


















































































































Отзывы: