NETGEAR N300 WNR2000v5 Скачать руководство пользователя | Manualshive

Страница: 108 / 113

background image

Troubleshooting

108

N300 WiFi Router

2.

In the field provided, type

ping -n 10

<

IP address

>

where <

IP address

> is the IP address of a remote device such as your ISP DNS server.

If the path is functioning correctly, replies like those examples shown in

Test the LAN Path to

Your Router

on page

107 are displayed.

If you do not receive replies, try the following:

•

Check that your computer has the IP address of your router listed as the default gateway.
If a DHCP server assigns the IP configuration of your computer, this information is not
visible on your computer’s Network Control Panel. Verify that the IP address of the router
is listed as the default gateway.

•

Check to see that the network address of your computer (the portion of the IP address
specified by the subnet mask) is different from the network address of the remote device.

•

Check that your cable or DSL broadband modem is connected and functioning.

•

If your ISP assigned a host name to your computer, enter that host name as the account
name in the Internet Setup screen.

•

Your ISP might be rejecting the Ethernet MAC addresses of all but one of your
computers.

Many broadband ISPs restrict access by allowing traffic only from the MAC address of your
broadband modem, but some ISPs additionally restrict access to the MAC address of a
single computer connected to that modem. If this is the case, configure your router to clone or
spoof the MAC address from the authorized computer.

Troubleshoot IP Addresses

By default, the router is set up to automatically assign IP addresses to network clients. The
router’s IP address is 192.168.1.1 unless you changed it. Wired and wirelessly connected
computers must have network IP addresses on the same network as the router. The simplest
way to meet this requirement is to configure each computer to obtain an IP address
automatically using DHCP.

If you customized the IP address settings of your router and you’re having trouble with
network connections, check the following:

•

Make sure that your computer’s IP address is on the same subnet as the router. If you are
using the recommended addressing scheme, your computer’s address is in the range of
192.168.1.2 to 192.168.1.254.

If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and
Mac OS generate and assign an IP address if the computer cannot reach a DHCP server.
These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in
this range, check the connection from the computer to the router, and reboot your
computer.

«
...
106
107
108
109
110
...
»

Содержание N300 WNR2000v5


















































































































Отзывы:

Нет отзывов

Похожие инструкции для N300 WNR2000v5

Бренд: Ebyte Страницы: 11

Бренд: Lanpro Страницы: 3

Бренд: TP-Link Страницы: 2

Бренд: WoMaster Страницы: 115

Бренд: i-MO Страницы: 18

Бренд: AT&T Страницы: 16

Бренд: Comcast Страницы: 16

Бренд: T-Mobile Страницы: 4

Бренд: T-Mobile Страницы: 13

Бренд: T-Mobile Страницы: 15

Бренд: Barricade Страницы: 21

Бренд: Steren Страницы: 38

Бренд: Mobotix Страницы: 102

Бренд: PI Manufacturing Страницы: 64

Бренд: Spectrum Страницы: 2

Бренд: Link Play Страницы: 24

Бренд: Planex Страницы: 113

Бренд: Ebyte Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды