NETGEAR LG6100D, Руководство пользователя

Страница: 90 / 186

Error! Reference source not found.
82
To enable DHCP:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
4. Click
Settings > Router > Basic
.
5. Next to
DHCP Server
, select
Enabled
.
6. You can set the following DHCP settings:
● DHCP IP Range: This is the starting and ending address of the range of IP addresses
available for your device to dynamically (that is, not permanently) assign to computers
connected to it.
The start address must be 192.168.0.10 or above and the ending address must be
192.168.0.50 or below.
●
DHCP Lease Time
: This is the amount of time, in minutes, a computer can use its
assigned IP address before it is required to renew the lease. After this time is up, the
computer is automatically assigned a new dynamic IP address.
Note:
Enter a number between 2 and 10080.
●
DNS Mode
— This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained. (See DNS Mode .)
7. Click
Submit
.
DNS Mode
The DNS Mode setting specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
4. Click
Settings > Router > Basic
.
5. Set
DNS Mode
to one of the following: