NETGEAR LG6100D, Руководство пользователя

Страница: 63 / 186

Gateway Settings 55
6. In the Allow Remote Access By section, specify the external IP addresses to be allowed
to access the gateway’s remote management:
7. For enhanced security, restrict access to as few external IP addresses as practical
8. Select one of the following:
 To allow access from a single IP address on the Internet, select the
Only This
Computer
radio button. Enter the IP address to be allowed access.
 To allow access from a range of IP addresses on the Internet, select the
IP Address
Range
radio button. Enter a beginning and ending IP address to define the allowed
range.
 To allow access from any IP address on the Internet, select the
Everyone
radio
button.
9. Specify the port number for accessing the web browser interface.
■ Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface.
Choose a number from 1024 to 65535, but do not use the number of any common
service port. The default is 8080, which is a common alternate for HTTP.
10. Click
Submit
.
To use remote access:
1. Launch a Web browser on a computer that is not on your home network.
2. Type your gateway’s WAN IP address into your browser’s address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number 8080, enter
http://134.177.0.123:8080 in your browser.
Network > Setup
From the Network Setup page, you can specify how the gateway selects mobile networks and
roaming, and receive network configuration updates from Sprint.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)