NETGEAR LG6100D, Руководство пользователя

Страница: 73 / 186

Gateway Settings 65
LAN
IP Address
The routing hardware’s IP address on the LAN.
Netmask
The routing hardware’s internal LAN subnet mask.
DHCP Server
This field enables (On) or disables (Off) DHCP. See DHCP .
DHCP IP Range
This specifies the starting and ending address of the range of IP
addresses available for your device to dynamically (that is, not
permanently) assign to computers connected to it. See
DHCP .
DHCP Lease Time
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
the computer is automatically assigned a new dynamic IP address. See
DHCP .
Enter a number between 2 and 10080.
DNS Mode
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
Manual:
The routing hardware assigns DHCP clients the DNS servers
specified in the
DNS 1
and
DNS 2
fields
Use this option to access a DNS server that provides customized
addressing or if you have a local DNS server on your network.
Note:
The
DNS 1
and
DNS 2
fields appear only if
DNS Mode
is Manual.
Auto
: The DNS server specified by Sprint is used.
DMZ
DMZ On/Off
Enable / disable demilitarized zone.
DMZ Address
If DMZ is enabled, this is the IP address of a single computer used to
receive all unsolicited incoming connections.
Submit
Router > Port Forwarding
Port forwarding lets you forward incoming traffic to specific ports and devices (per their local IP
address) on your network. (Normally, incoming traffic is blocked.)