NETGEAR LG6100D, Руководство пользователя

Страница: 111 / 186

Set up a Virtual Private Network (VPN) 103
Configure a Windows Computer as a Remote Client
This example describes how to use NETGEAR ProSAFE VPN client software to set up a VPN
client for the gateway.
To use NETGEAR ProSAFE to set up a VPN client:
Download the trial version of NETGEAR ProSAFE VPN client (VPNG01L/VPNG05L
Professional Software Version 5.14.003) and install it on the Windows computer.
1. This software is available here: http://kb.netgear.com/app/answers/detail/a_id/20316 .
2. Launch the VPN client software.
3. In the left pane, select
Global Parameters
.
4. Specify the following settings:

Lifetime (sec):
• Authentication (IKE): Enter
3600
,
360
,
28800
.
• Encryption (IPSec): Enter
3600
,
300
,
28800
.
 Dead Peer Detection (DPD):
• Check interval: Enter
30
.
• Max. number of retries: Enter
5
.
• Delay between retries: Enter
15
.
 Miscellaneous:
• Retransmissions: Enter
2
.
• X-Auth timeout: Enter
60
.
5. In the left pane, select
Gateway
, and click the
Authentication
tab.
6. In the Authentication screen, specify these settings:
 In the Addresses section, specify the following:
• In the
Remote Gateway
field, enter the WAN IP address.
• Select the
Pre-Shared Key
radio button and enter the same key that is
configured on the gateway.
 In the IKE section, specify the following:
• Encryption: Select
3DES
.