NETGEAR LG6100D, Руководство пользователя

Страница: 117 / 186

Set up a Virtual Private Network (VPN) 109
Note:
This pre-shared key is unique to the site-to-site VPN configuration. If you set up a
client-to-gateway VPN tunnel with this gateway, you must use a different pre-shared key
for the site-to-site VPN.
4. In the Site-to-Site Configuration Details section, click the
Add
button.
5. In the Site Name field, type a meaningful name that is easy to understand.
6. In the WAN IP field, enter the remote gateway’s WAN IP address.
7. In the Remote Site IP address and Subnet field, enter these settings from the remote
gateway.
Note:
Each gateway must have a unique non-overlapping IP address range.
8. Click the
Save
button.
9. For the second gateway, repeat Steps 1–8 of this procedure.
Enable the Site-to-Site VPN
Enabling the VPN activates the VPN server feature on the gateway.
To enable the VPN:
1. On the first gateway, select
Settings > General > VPN
.
2. Select the VPN Status
Enable
radio button.
3. Click the
Apply
button. The VPN connection is activated.
4. On the second gateway, select
Settings > General > VPN
.
5. Select the VPN Status
Enable
radio button.
6. Click the
Apply
button. The VPN connection is activated.
The IPSec VPN tunnel is established between the two gateways. The LAN-side resources from
one gateway can access the other through this tunnel.
To disable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
4. Click
Settings > General > VPN
.