manualshive.com logo in svg

NETGEAR JNR1010v2, Руководство пользователя

Поделиться
Скачать
NETGEAR JNR1010v2 Скачать руководство пользователя страница 45

genie ADVANCED Home 

45

 JNR1010v2 N150 Wireless Router

To set up a default DMZ server: 

1. 

Log in to the router.

For more information, see 

Log In to Your Router After Installation 

on page

 

18.

2. 

Select 

ADVANCED > Setup > WAN Setup

. 

The WAN Setup screen displays.

3. 

Select the 

Default DMZ Server

 check box.

4. 

Type the IP address.

5. 

Click the 

Apply

 button.

Your changes are saved.

Change the MTU Size

The maximum transmission unit (MTU) is the largest data packet a network device transmits. 
When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If any device in the data path has a lower MTU 
setting than the other devices, the data packets must be split or fragmented to accommodate 
the device with the smallest MTU. 

The best MTU setting for NETGEAR equipment is often just the default value, and changing 
the value might fix one problem but cause another.

WARNING:

An incorrect MTU setting can cause Internet communication 

problems such as the inability to access certain websites, frames 
within websites, secure login pages, or FTP or POP servers.

Leave the MTU unchanged unless one of these situations occurs:

•

You have problems connecting to your ISP or other Internet service, and technical 
support of either the ISP or NETGEAR recommends changing the MTU setting. These 
web-based applications might require an MTU change:

-

A secure website that does not open, or displays only part of a web page

-

Yahoo email

-

MSN portal

-

America Online’s DSL service

•

You use VPN and have severe performance problems.

•

You used a program to optimize MTU for performance reasons, and now you have 
connectivity or performance problems.

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are 
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 
until the problem goes away.

Содержание JNR1010v2




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды