genie BASIC Settings
26
JNR1010v2 N150 Wireless Router
•
Domain Name (If Required)
. Enter the domain name provided by your ISP.
•
Internet IP Address
:
-
Get Dynamically from ISP
. Your ISP uses DHCP to assign your IP address. Your
ISP automatically assigns these addresses.
-
Use Static IP Address
. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned to you. The gateway is the ISP router to which
your router connects.
•
Domain Name Server (DNS) Address
. The DNS server is used to look up site
addresses based on their names. Select one o the following radio button:
-
Get Automatically from ISP
. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns these IP addresses.
-
Use These DNS Servers
. If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select this radio button, and
enter the IP address of your ISP primary DNS server. If a secondary DNS server
address is available, enter it also.
•
Router MAC Address
. The Ethernet MAC address used by the router on the Internet
port. Some ISPs register the MAC address of the network interface card in your
computer when your account is first opened. They accept traffic only from the MAC
address of that computer. This feature allows your router to use your computer’s MAC
address (this situation is also called spoofing or cloning). Select one of the following
radio buttons:
-
Use Default Address
. Use the default MAC address.
-
Use Computer MAC Address
. The router captures and uses the MAC address of
the computer that you are now using to configure the router. To configure the
router, use the computer that is registered with the ISP.
-
Use This MAC Address
. Enter the MAC address that you want to use.
There fields display when your ISP requires a login:
•
Internet Service Provider
. As the ISP tunneling protocol, select
PPTP
or
PPPoE
.
•
Login
. Enter the login name provided by your ISP. This name is often an email
address.
•
Password
. Enter the password that you use to log in to your ISP.
•
Service Name (If Required)
. Enter the service name provided by your ISP. If your
ISP did not give you a service name, leave this field blank.
•
Connection Mode
. Select the one of the following connection modes:
-
Always On
. The connection automatically starts when you turn on the router and
does not time out. If the connection is terminated for some reason, the router
attempts to reestablish the connection.
-
Dial on Demand
. The connection automatically starts when outbound traffic to
the Internet exists and automatically terminates when the idle time-out period is
exceeded.
