NETGEAR D6400, Руководство пользователя

Страница: 64 / 292

Manage the Internet Settings Manually
64
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
8. Click the Apply button.
Your settings are saved.
9. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the
Internet Connection on page 280.
Manually Set Up a Cable of Fiber Internet Connection
You can view or change the modem router’s cable or fiber Internet connection settings
manually. The following sections describe the options that are available to you to manually
set up the cable or fiber Internet connection:
• Specify a Cable or Fiber Connection Without a Login Requirement on page 65
• Specify a Cable or Fiber Connection With a Login Requirement and PPPoE Service on
page 69
Note: Some ISPs require that you register on their website before you can
obtain Internet service. Follow the directions that your ISP gave you.
Note: If you connect both a DSL modem and a cable or fiber modem to the
modem router and you want to manually specify the settings for a
cable or fiber Internet connection, you must first set the WAN
connection preference manually to the Ethernet WAN port (see
Change the Physical WAN Connection Preference on page 197). If
you do not, the DSL settings take precedence over the cable or fiber
settings. However, NETGEAR recommends that you connect
only the
modem that you intend to use for your Internet connection: a DSL
modem, cable modem, or fiber modem.
Use Computer MAC Address The modem router captures and uses the MAC address of the computer
that you are now using. You must use the one computer that is registered
by the ISP.
Use This MAC Address Enter the MAC address that you want to use. By default, the field displays
the MAC address of the Internet port.
Field Description