manualshive.com logo in svg

NETGEAR D6400, Руководство пользователя

Поделиться
Скачать
NETGEAR D6400 Скачать руководство пользователя страница 217

Manage the WAN and LAN Network Settings 

217

 AC1600 WiFi VDSL/ADSL Modem Router Model D6400

In this case, you must define a static route, instructing your modem router that 134.177.0.0 is 
accessed through the ISDN modem router at 192.168.0.100. Here is an example:

•

Through the destination IP address and IP subnet mask, specify that this static route 
applies to all 134.177.x.x addresses.

•

Through the gateway IP address, specify that all traffic for these addresses is forwarded 
to the ISDN modem router at 192.168.0.100.

•

A metric value of 1 works fine because the ISDN modem router is on the LAN. 

Set Up a Static Route

You can add a static route to a destination IP address and specify the subnet mask, gateway 
IP address, and metric.

To set up a static route:

1. 

Launch an Internet browser from a computer or WiFi device that is connected to the 
network.

2. 

Type 

http://www.routerlogin.net

.

A login screen displays.

3. 

Enter the user name and password for the modem router.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

4. 

Click the 

OK

 button.

The BASIC Home screen displays.

5. 

Select 

ADVANCED > Advanced Setup > Static Routes

.

Содержание D6400





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды