manualshive.com logo in svg

NETGEAR C6250, Руководство пользователя

Поделиться
Скачать
NETGEAR C6250 Скачать руководство пользователя страница 197

 Factory Default Settings and Specifications

197

 AC1600 WiFi Cable Modem Router

Technical and Environmental Specifications

WPS

WPS capability

Enabled

Modem router’s PIN

Enabled; see the web management interface (path 

ADVANCED > Advanced Setup > Wireless 

Settings

)

Keep Existing Wireless Settings

Enabled (2.4 GHz and 5 GHz bands)

1. Maximum WiFi signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions 

and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower 
actual data throughput rate.

Table 7.  Modem router specifications

 

Feature

Description

Data and routing protocols

TCP/IP, DHCP server and client, DNS relay, NAT (many-to-one), TFTP client, 
VPN pass-through, DNS, UPnP

Power adapter

• 

North America (input): 120V, 60 Hz, 1A input

• 

North America (output): 12 VDC @ 2.5A, 30W maximum output

Dimensions and weight

• 

7.68 by 7.79 by 2.52 in. (195 by 198 by 64 mm)

• 

1.2 lb (0.54 kg)

WAN port

One coaxial cable connector
DOCSIS 3.0. backward compatible with DOCSIS 2.0, 1.1, and 1.0

Ethernet ports

Two 10/100/1000BASE-T, RJ-45 autosensing ports

USB ports

One USB 2.0 ports

WiFi

• 

2.4 GHz band: Up to 300 Mbps or 802.11b/g/n devices

• 

5 GHz band: Up to 1.3 Gbps for 802.11a/n/ac devices

WiFi channels

• 

2.4 GHz band: Auto or a single channel from 1 through 11

• 

5 GHz band: 36, 40, 44, 48, 149, 153, 157, 161 or 165

Maximum computers per WiFi 
network

Limited by the amount of WiFi network traffic generated by each node

Operating frequency ranges

• 

2.4 GHz band: 2.412–2.462 GHz

• 

5 GHz band: 5.18–5.24 + 5.745–5.825 GHz

Table 6.  Factory default settings (continued)

Feature

Default Settings

Содержание C6250







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды