manualshive.com logo in svg

NETGEAR C6250, Руководство пользователя

Поделиться
Скачать
NETGEAR C6250 Скачать руководство пользователя страница 185

Diagnostics and Troubleshooting 

185

 AC1600 WiFi Cable Modem Router

Troubleshoot with the LEDs

When you turn on the power, the LEDs light as described here:

1. 

When power is first applied, the Power LED 

 lights red for a second and then turns 

green.

2. 

After about 15 seconds, the Downstream LED 

, Upstream LED 

, and Internet 

LED 

 start blinking green.

3. 

After about 35 seconds, the 2.4 GHz LED 

 lights green.

4. 

After about 45 seconds, the 5 GHz LED 

 lights green.

5. 

When the modem router establishes external connections, the following occurs:

•

After the modem router establishes a downstream connection, the Downstream 

LED

 

 lights solid amber or solid green.

•

After the modem router establishes an upstream connection, the Upstream LED 

 

lights solid amber or solid green.

•

After the modem router establishes an Internet connection, the Internet LED 

 

lights solid green. At this point, the modem router is ready for use.

Note:

Whether the Ethernet LED 

 lights depends on whether an Ethernet 

device is connected to the modem router.

Power LED Is Off

If the Power LED 

 and other LEDs are off when your modem router is turned on, do the 

following:

•

Check that the power cord is correctly connected to your modem router and that the 
power supply adapter is correctly connected to a functioning power outlet. 

•

Check that you are using the 12 VDC 2.5A power adapter that NETGEAR supplied for 
this product.

If the error persists, a hardware problem might exist. For recovery instructions or help with a 
hardware problem, contact technical support at 

netgear.com/support

.

Power LED Is Red

When the modem router is turned on, the Power LED 

 lights red for one second and then 

turns green. If the Power LED does not turn green, a fault exists within the modem router. In 
this situation, turn the power off and on to see if the modem router recovers. If the Power LED 
still does not turn green, do the following:

•

Turn the power off and on one more time to see if the modem router recovers.

•

Clear the modem router’s configuration to factory defaults (see 

Return the Modem Router 

to Its Factory Default Settings 

on page

 

113). This sets the modem router’s IP address to 

192.168.0.1.

Содержание C6250







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды