MultiPro 2000 User Manual
20
The following block diagram shows the electrical
connections between The Safety Analyzer and the device
under test.
External Leakage: Point to Point Measurement
It is also referred to as point to point Leakage.
This function can be used to measure Leakage
current flowing from any conductive surface of
the DUT and Earth ground.
From the “MAIN MENU” select “XTR” (F3 Key).
“EXTERNAL LEKAGE” Menu will be displayed with
the prompt to connect the Input Cable (
Screen Shot
4
). The external input Jacks are on the left panel
marked “INPUT”. To measure the leakage between
two points, connect one lead to one point (Earth
Ground) of the DUT and the other lead to another
conductive point on the DUT and press “READ”.
