MultiPro 2000 User Manual
13
Getting Started
Connect the Analyzer to a grounded three prong outlet.
The Analyzer is intended for use with single phase ground
power. It is not intended for dual phase power
configurations.
Turn the Analyzer on using the rocker switch on the side
panel. The Analyzer will perform a series of self tests and
momentarily display the model name and the software
version followed by the “MAIN MENU” as shown below.
Menu Descriptions
Before connecting the DUT (Device Under Test), it is
important to get familiar with the operation of the unit
and observe the safety precautions.
The following is the screen shot of the “Main Menu” on
power up as shown (
Screen Shot 1
).
“INT” :- Internal Measurement
Line Voltage Measurement
From the “MAIN MENU” select “INT” by pressing F1
Screen Shot 1
