MultiPro 2000 User Manual
18
To save the result press F1 (“SAVE”). This will save the
test data in the memory under Device ID.
To measure leakage for open neutral conditions first
select first select “NORMAL POLARITY” followed by F6 to
open the neutral.
The auto-range feature of the MultiPro will select the
appropriate range automatically. For reading in excess of
100 micro amps, the decimal point will not be displayed.
The user can switch between Reverse and normal
Polarity at any time to verify readings or, to determine if
any service action performed on the device under test
affects the readings.
The following block diagram shows the electrical
connections between The Safety Analyzer and the device
under test.
Screen Shot 3
