26
NTC-8000 – M2M Multi-Port Network Gateway
UM-00006 v1.1
www.netcommwireless.com
RIP
RIP (Routing Information Protocol) is used for advertising routes to other gateways. Thus all the routes in the gateway’s routing table
will be advertised to other nearby gateways. For example, the route for the gateway’s Ethernet subnet could be advertised to a
Gateway on the PPP interface side so that a Gateway on this network will know how to route to a device on the gateway’s Ethernet
subnet. Add the routes as appropriate in the Static Routes section – see
Adding Static Routes
.
Note: Some gateways will ignore RIP.
Figure 23 - RIP Settings
1.
Next to the RIP option, select the Enable option.
2.
In the Version drop down list, select the RIP version you wish to use.
3.
Use the Interface drop down list to select the interface for the RIP function.
4.
Click the Save button to save the settings.
