64
NTC-8000 – M2M Multi-Port Network Gateway
UM-00006 v1.1
www.netcommwireless.com
System Configuration
The System configuration page provides the ability to configure an external syslog server, TCP Keepalive settings, the power saving
feature and SFTP login credentials.
Figure 68 - System Configuration Items
The TCP Keepalive function can be used to ensure the WWAN connection does not disconnect due to inactivity, while the Power
Save mode can help ensure that the gateway does not cause battery drain which is especially useful when the gateway is installed
in a vehicle. Lastly, the SFTP username and password can be entered on this page.
OPTION
DEFINITION
IP / Hostname [:PORT]
The IP address and port of the external syslog server to which logging information should be sent.
Log to file
Enables or disables the logging of system events.
Keepalive
Enable or Disable the TCP Keepalive function.
Keepalive Time
The interval between the last packet sent and the first TCP keepalive packet being sent. This
must be an integer between 60 and 65535 seconds.
Keepalive Interval
The time between subsequent TCP Keepalive packets. This must be an interval between 10 and
28800 seconds.
Keepalive Probes
The number of TCP Keepalive packets to send. This must be a value between 1 and 1000.
Power Save Mode
Enables or disables the power saving feature of the gateway.
Remote SFTP Username
The SFTP username for the SFTP account.
Remote SFTP Password
The SFTP password for the SFTP account.
Table 28 - System Configuration Items
