Netberg Demos R420 M2 Скачать руководство пользователя страница 197

Страница: 197 / 213

Server Safety Information

186

10.1. Safety Warnings and Cautions

To avoid personal injury or property damage, before you begin installing the product, read, ob-

serve, and adhere to all of the following safety instructions and information. The following safety

symbols may be used throughout the documentation and may be marked on the product and / or

the product packaging.

Indicates the presence of a hazard that may cause minor personal injury or property

damage if the CAUTION is ignored.

Indicates the presence of a hazard that may result in serious personal injury if the

WARNING is ignored.

Indicates potential hazard if indicated information is ignored.

Indicates shock hazards that result in serious injury or death if safety instructions are not followed.

Indicates hot components or surfaces.

Indicates do not touch fan blades, may result in injury.

Indicates to unplug all AC power cord(s) to disconnect AC power.

Содержание Demos R420 M2






















































































































































































































Результаты поиска

Содержание Demos R420 M2

Отзывы:

Бренды по названию

Популярные бренды

Netberg Demos R420 M2, Руководство пользователя

Результаты поиска

Содержание Demos R420 M2

Отзывы:

Бренды по названию

Популярные бренды