Netberg Demos R420 M2 страница 180 Скачать руководство пользователя

Страница: 180 / 213

BIOS

169

Utilities

File Name

Description

Fparts.txt

xxxxxxxx.BIN

6.8.2. ROM Flash

6.8.2.1. Update under DOS prompt:

1. Copy AFUDOS.EXE, FBB.BAT and RomFileName.rom (ROM image) to bootable storage.

2. Plug the bootable storage (ex :USB disk) and boot to dos prompt (no Himem).

3. Run FBB.BAT (depending on if Boot Block needs to be updated).

FBB.BAT: Update BIOS with boot lock.

4. Restart the system and load the BIOS default values.

6.8.2.2. Update under EFI Shell

1. Copy AfuEfix64.efi, FBB.nsh and RomFileName.rom (ROM image) to bootable storage.

2. Boot into BIOS setup and select Built-in EFI Shell to boot.

3. Run FBB.nsh

4. Restart system & load BIOS default value.

6.8.2.3. Update ME FW with the whole image file under Linux en-

vironment

1. Copy afulnx_64, FBBMElnx.sh and XXXXXXXX.BIN to USB disk.

2. Plug the USB disk and boot into Linux environment.

3. Copy afulnx_64, FBBMElnx.sh and XXXXXXXX.BIN to desktop from USB disk.

4. Open Terminal and key command below:

• “chmod 777 afulnx_64”

• “chmod 777 FBBMElnx.sh”

• “chmod 777 XXXXXXXX.BIN”

5. Run “FBBMElnx.sh” or “AfuEfix64 XXXXXXXX.BIN /P /B /N /X /ME”

After flash programming is done, turn off SUT and then power on the system.

6.8.2.4. BIOS Recovery

A BIOS recovery can be accomplished from one of the following devices: an USB Disk-On-

Key/CD-ROM, an ATAPI CD-ROM/DVD. The recovery media must include the BIOS image file,

RomFileName.rom in the root directory.

Содержание Demos R420 M2






















































































































































































































Результаты поиска

Содержание Demos R420 M2

Отзывы:

Похожие инструкции для Demos R420 M2

Бренды по названию

Популярные бренды

Netberg Demos R420 M2, Руководство пользователя

Результаты поиска

Содержание Demos R420 M2

Отзывы:

Похожие инструкции для Demos R420 M2

Бренды по названию

Популярные бренды