Net2Phone MAX IP10 User Guide
5
4) Press the [#] key after entering the phone number. MAX IP10 attempts to connect the call,
and you will see screen like Figure 2 -9 on the LCD.
Figure 2 -9 Connecting
5) If the connection attempt is successful, you will hear ringback tone. If the connection
attempt fails, you will hear error tone and LCD will display one of the messages
corresponding to the reason for the connection error. (Figure 2-4)
6) When called party answers, you can begin speaking. On the LCD, you will see screen like
Figure 2-5.
7) When the call is over, hang up or press [SPEAKER] key. On the LCD, you will see screen
like Figure 2-6
2.2. Answering an Incoming Call
1) When the phone is ringing, you will see the LCD screen like Figure 2-10.
a) Call from PSTN connection (analog phone call)
b) Call from MAX-to-MAX connection (Net2Phone call)
c) MAX-to-MAX connection state
Figure 2 -10 Ringing / Connection
2) Lift handset or use speakerphone by pressing [SPEAKER] key, then start speaking.
2.3. Redial (Available only when power is ON)
When you want to make a call with the last dialed number, follow these steps:
1) Lift handset or press [SPEAKER] key and listen for the dial tone. You will see the LCD
screen like Figure 2-1.
Connecting…
*729876543210
PSTN C all Mode
123456789
Caller ID
1234567890
Talk
1234567890
