Net2Phone MAX IP10 User Guide
6
2) Press [REDIAL] key, then on the LCD, the last dialed number will appear (Figure 2-11)
Figure 2-11 Redialing
3) MAX IP10 attempts to connect the call, and you will see screen like Figure 2-3 on the LCD.
4) If the connection attempt is successful, you will hear the ringback tone. If the connection
attempt fails, you will hear the error tone and LCD will display one of the messages
corresponding to the reason for the connection error. (Figure 2-4)
5) When called party answers, you can begin speaking. You will see screen like Figure 2-5 on
the LCD.
6) When the call is over, hang up or press [SPEAKER] key. On the LCD, you will see screen
like Figure 2-6.
2.4. Memory Dial
2.4.1. Making a Call using Memory Dial
There are 9 memory slots, 1 to 9. When you want to make a call with the phone number that is
stored in one of them, follow these steps:
1) Lift handset or press [SPEAKER] key and listen for the dial tone. On the LCD, you will see
screen like Figure 2-1.
2) Press [MEMORY] key. On the LCD, you will see screen like Figure 2-12.
Figure 2-12 Memory Dial Mode
3) Press a number (1-9) to choose the memory slot that stores the phone number to call, then
the phone number will be appear, like Figure 2 -13.
Figure 2 -13 Memory Dialing
4) MAX IP10 attempts to connect the call.
5) You will hear ringback tone.
6) When called party answers, you can begin speaking.
7) When the call is finished, hang up or press [SPEAKER] key.
Enter Number
123456789
Memory Dial(1 -9)
Enter Number
123456789
