Net2Phone MAX IP10 User Guide
4
4) If the connection attempt is success, you will hear ringback tone. If the connection attempt
fails, you will hear error tone and LCD screens the one of following messages corresponding to
the reason for the connection error. (Figure 2-4)
“Call Failed ”
“Bad PIN / Account”
“Insufficient Funds”
“Account In Use”
“Busy”
“Duplicate PIN or Account”
Figure 2 -4 Connection Error (Call Failed case)
5) When called party answers, you can begin speaking. You will see LCD screen like Figure 2-5.
Figure 2-5 Connection success
6) When the call is over, hang up or press [SPEAKER] key. On the LCD, you will see screen like
Figure 2-6.
Figure 2-6 On Hook state
2.1.2. Making a “Max-to-Max” Call
1) Lift handset or press [SPEAKER] key and listen for the dial tone. You will see LCD screen
like Figure 2-1.
2) Press the [N2P] key, then on the LCD, the digits ‘*72’ will appear (Figure 2 -7)
Figure 2 -7 Virtual Number Dial State
3) Dial the Virtual Number of the destination Net2Phone device. LCD screens the dialed
number.
Figure 2-8 Virtual Number Dialing
Talk
123456789
Call Failed
Enter Number
*729876543210
Enter Number
*72
1234567890
Max IP Phone
