Net2Phone MAX IP10, Руководство пользователя

Страница: 2 / 23

Net2Phone MAX IP10 User Guide
1
Introduction
Conventions Used in this Guide
In this Guide, text that will be displayed on LCD screen is set in Courier font.
About This Guide
This User’s Guide is intended to help you set up and use the full features of the MAX IP10.
MAX IP10 supports maintenance interfaces of web-browser, telnet and keypad/LCD interface.
This Guide describes how to operate and configure MAX IP10 using keypad and LCD.
1. MAX IP10 Overview
1.1. Features
MAX IP10 supports following features:
- IP (Internet Protocol) phone operation with Net2Phone VOIP protocol
- Analog phone operation for local phone call
-
Local configuration via keypad/LCD
-
Remote configuration via Telnet or Web-browser
-
S/W upgrade via FTP (New S/W notice will be displayed on LCD automatically)
- Volume control
- Mute/Redial/Speed-dial key
- Call Hold (holds IP phone call while using analog phone)
-
PSTN fallback (auto -switching to analog phone mode in case of power failure)
-
IP Addressing: static/dynamic IP support (DHCP)
-
PPPoE support
- QoS support (D iffserv)
- RTP/RFC2833 support
-
N2P account management
-
Minute/Dollar balance display
- Call statistics
- Billing support (CDR generation)
1.2. User Interface
MAX IP10 supports following user interfaces:
-
Handset / Speakerphone
- Keypad / LCD
- Ethernet port for PC & LAN
- Analog phone line port
-
Tone/Pulse select switch
-
Earpiece amplifier switch