NEOMERIS CONTROL DES
Operation
Build:20211025-094624-9873335NSt
All information and technical data are subject to
change
Page 57
If you are entering parameters, pressing <Enter> will cause the cursor to move one position further
right. If you are changing parameters, use the arrow keys to select the requested digit and then press
<Enter> to confirm. Select all the parameters to apply the values.
The
<M> (or <ESC>) key is used to return from a sub-menu or to cancel an entry.
7.2.1 Automatic reset
If no keys have been pressed for 5 minutes, the system will automatically quit the menu view und
return to the main display.
7.2.2 Passwords
The device has 3 password levels with the following factory settings:
§
User password:
1111
§
Technician password:
2222
§
Operator password:
3333
We recommend changing and noting down passwords immediately after start-up.
7.2.3 Setup of Parameters and Values
Any parameters / values that can be set are accessible through the control menu. Editing dialogs
are used to change the individual parameters. These dialogs can be modified with the
é
/
ê
-keys. After entering the changes, they can be confirmed with the
Enter
-key.
Example of an editing dialog:
