NEO TOOLS 90-032, Перевод оригинальной инструкции

Страница: 6 / 44

INSTALATION ACCESSORIES
1 Bracket U Shape 1 PCS
2 Bracket L Shape 2 PCS
3 Screw M6x60 2 PCS
4 Nut M6 2 PCS
5 Screw M6x12 2 PCS
INSTALLATION
Please check all the items against the parts list after opening the box.
Only all the items are complete, the installation could be followed.
1.
Two brackets 1# should be attached to heater by screws 3#.
2. Drill holes and mount bracket 6# by mounting pins 2#.
3. Connect brackets by bolts 5# and nuts 4#.
Tools needed: pencil, hammer, level, screw driver, power drill
and drill bits.
A wall mounting bracket is provide with the heater which has been
specifically designed to allow this product to be fitted to a wall or
ceiling before drilling the holders for the wall/ceiling is solid and that
there are no hidden water pipes or electric wires. The heater must be
installed no less than 50 cm form side walls and no less than 180 cm
off the floor.
Important: Ensure that the supply cables is well mounted and that it
does not come into contact with reflector of the heater or that is does
not trail into heated area, the supply cable can be fixed to them metal
mounting bracket behind heater with plastic zip ties.
INSTALLATION WITH PARASOL (optional)