Nellcor OxiMax N-65, Руководство оператора

Страница: 47 / 152

OXIMAX N-65 Operation
O
XI
Max N-65 Operator’s Manual 41
O
XI
M
AX
Sensor Attached
When an O
XI
M
AX
sensor contains patient event alarm
data, and is attached to the monitor, the Data In-Sensor
indicator is shown.
The monitor shows two dashes in the %SpO
2
and Pulse
Rate displays as it searches for a valid pulse. For optimal
performance allow the monitor to search and lock onto a
pulse for approximately 10 seconds.
When a valid pulse is detected, the monitor begins
monitoring and displays patient parameters.
Movement of the blip bar indicates that real-time data is
displayed. Continue to listen for the pulse beep tone as
the monitor is used. If it does not sound with each pulse,
it indicates one of the following:
• pulse beep volume is off
• speaker/audio has malfunctioned
• signal is corrupted
• O
XI
M
AX
N-65 has stopped functioning