Necta Vending Solutions SpA Sfera, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 68

2
© by NECTA VENDING SOLUTIONS SpA 0404 211-02
INTRODUCTION
This technical documentation is part and parcel of the
vending machine and must always follow the machine
in case it is moved or transfer of ownership, so as to
allow consultation by different operators.
Before starting installation and using the machine, it is first
necessary to carefully read and understand the instruc-
tions contained in this manual, as they offer important
information on installation safety, operating instructions
and maintenance.
This manual is divided into three chapters.
The first chapter describes the loading and routine main-
tenance operations which are carried out in areas of the
machine accessible with simple use of the door key,
without using any other tools.
The second chapter contains the instructions for correct
installation and all information necessary for optimum use
of the machine.
The third chapter describes maintenance operations
which involve the use of tools to access potentially danger-
ous areas.
The operations described in the second and third
chapters must be carried out only by personnel who
have the specific knowledge of the machine function-
ing from a point of view of electrical safety and health
regulations.
IDENTIFICATION OF THE VENDING
MACHINE AND ITS CHARACTERISTICS
Each machine is identified by its own serial number,
indicated on the rating plate attached inside the cabinet on
the right side.
This plate (see figure below) is the only one acknowledged
by the manufacturer as the identification of the apparatus,
and carries all the data which readily and safely give
technical information supplied by the manufacturer. It also
assists in the spare parts management.
Absorbed power
Operating voltage
Model
Product code
Current
Frequency
Serial number
IN THE EVENT OF FAILURES
In most cases, any technical problems are corrected by
small repair operations; however, before contacting the
manufacturer we recommend that this manual be read
carefully.
Should there be serious failures or malfunctions, contact
the following:
NECTA VENDING SOLUTIONS SpA
Via Roma 24
24030 Valbrembo
Italy - Tel. +39 - 035606111
TRANSPORT AND STORAGE
To prevent any damage, special care should be taken
when loading or unloading the vending machine.
The machine can be lifted by a motor-driven or manual
forklift truck, and the forks are to be placed underneath the
machine from the side clearly indicated by the symbol on
the cardboard package.
Do not:
- overturn the vending machine;
- drag the vending machine with ropes or similar;
- lift the vending machine by its sides;
- lift the vending machine with slings or ropes;
- shake the vending machine.
The machine should be stored in a dry room where the
temperature remains between 0°C and 40°C.
Avoid stacking machines one on top of the other and
always keep it upright as indicated by the arrows on the
packing.
Refrigeration system class
Type and amount of refrigerant
Type
Fig. 1