Necta Vending Solutions SpA Sfera, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 68

21
© by NECTA VENDING SOLUTIONS SpA 0404 211 - 02
MISCELLANEOUS
This set of functions contains some sub-menus, used less
frequently, which permit control of the functions described
below.
PASSWORD
ENABLING THE PASSWORD
This function is used to enable the option of requesting the
password to access the technician menu; the password
request is disabled by default.
ENTERING THE PASSWORD
It is a 5-digit numeric code which is required to access the
technician menu.
The default value of this code is set to 00000.
ENERGY SAVING
This function, disabled by default, is used to suspend
vending in certain hours.
2 switch-off time bands can be programmed.
DISPLAYING THE FILLER MENU
This function is used to determine the filler menu options
to be left active or to be disabled (ON/OFF):
- Statistics
- Single selection prices
- Change tubes control
- Special selections
- Test
- EVADTS
The reference numbers of the menus do not change even
if some are disabled.
EXTERNAL LIGHTING
Setting whether or not the lighting lamps are to be switched
on when the machine is out of service or during the
“Energy saving” time band.
STATISTICS
Data on the machine operations is stored in both general
counters and relative counters, which can be reset without
losing total data.
PRINT
Connect an RS232 serial printer having a Baud rate of
9600, 8 data bit, no parity, 1 stop bit to the serial port
located on the push button board to print all of the
statistics, and namely:
Total
1 - counter by single selection;
2 - counter by time bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors;
Relative
1 - counter by single selection;
2 - counter by time bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors;
The hardcopy printout will also contain the machine infor-
mation, and namely:
- date/time of print
- machine name
- software version
- operator code
- machine code
- Installation date.
To connect the printer, do as follows:
- press the confirm print button “ ”, displaying the
message “Confirm?”;
- connect the printer before confirming;
- press the confirm button “ ” to start printing.
DISPLAY
When pressing the confirm button “ ” the data described
in the paragraph “Printing the statistics” is sequentially
displayed.