July 2003
NEC Business Solutions Ltd
276 – D13
Distinctive Ringing
Doc. No. 8
201 - Re
lease 1.0
July 2003
General
Incoming outside calls and internal calls provide flexible ringing tones
and patterns.
Distinctive ringing patterns are as follows:
1. Internal ring tone provides a distinctive ringing pattern of 1 second
ON/2 seconds OFF (system default).
2. Incoming CO/PBX outside calls are assigned synchronous ring.
The ringing pattern sent from the exchange connected to
the CO PBX/Centrex lines is repeated at all stations assigned
to ring, except for Single Line Telephones connected to AP(R)-
R( )A Units.
3. If synchronous ringing is disabled, an incoming CO call can be
assigned to ring at one pattern and an incoming PBX/Centrex call
can ring at a different pattern.
4. Incoming TIE/DID outside calls provide a distinctive ring pattern of
2 seconds ON/4 seconds OFF (at system default).
5. Incoming TIE/DID delayed ringing pattern is 0.25 sec. ON/0.25 sec.
OFF (at system default).
6. Automated Attendant transferred calls provide a distinctive ring
pattern of 0.5 sec. ON/0.5 sec. OFF (system default).
DIT/ANA calls to stations also provide Distinctive Ringing
(Synchronous ring pattern).
Internal ringing tone to Multiline Terminals is programmable in System
Programming system-wide.
