Xen IPK
Features and Specifications Manual
Features and Specifications Manual
M3 – 413
D
oc. N
o. 8201 -
Release
1.0
July 20
03
1.
Call a trunk that is set as Automated Attendant.
2.
Select the option for an extension connected to the Conference
Bridge.
3.
When the voice prompt is heard, enter the Conference Bridge 1 or 2
password and press
L
.
4.
Start the conference call.
1.
Call the Attendant and ask to be transferred to an extension
connected to the Conference Bridge.
2.
When the voice prompt is heard, enter the Conference Bridge 1 or 2
password and press
L
.
3.
Start the conference call.
SERVICE
CONDITIONS
Data Assignment
The CNF(8)-U( ) ETU must be assigned as an SLI(8)-U( ) ETU using
Memory Block 7-1.
The ports connected to the CNF(8)-U( ) ETU must be assigned as
voice mail ports using Memory Block 4-35 to ensure proper disconnect
signals.
All ports that are set to the same conference group should be set to
the same Master Hunt Group using Memory Blocks 4-14 and 4-15.
When CNF is set for two, four-party conferences, ports 1~4 should be
set to the same Master Hunt Group, and ports 5~8 should be set to a
different Master Hunt Group using Memory Blocks 4-14 and 4-15. This
allows two different Pilot Numbers for each conference.
- OR -
If only one Pilot Number is needed, out all eight ports in one hunt
group using Memory Block 4-15. When the password is entered, the
conference selected is the conference you enter.
DIT assignment may be set to Master Hunt Group using Memory
Block 3-42 for Day or 3-43 for night.
To start a conference call from an incoming CO call using an
Automated Attendant:
To start a conference call from an incoming CO call using an
Attendant:
