NEC Versa LX, Инструкция по обслуживанию и справочник

Страница: 53 / 138

System Configuration and Setup 2-29
!
CAUTION
Before using Partition Magic refer to the associated
cautionary notes on the Application and Driver CD. The
cautionary notes contain important information about
designating the partitions on the hard disk drive as primary
and/or extended.
The partitions must be properly designated before using the
Product Recovery CD to reinstall your operating system.
If
the partitions on the hard disk drive are not properly
designated, it will appear as though data loss has occurred
after using the Partition Restore Choice on the Product
Recovery CD.
After using Partition Magic to create multiple partitions on your hard disk drive,
you must perform a partial restore using the Product Recovery CD for Windows
95. The partial restore process reinstalls the operating system and related drivers
to drive C:.
Intel LANDesk Client Manager
Intel LANDesk Client Manager provides the capability for managing a variety
of components within a PC system. These components include network
interface cards, memory modules, printers, and software applications. LANDesk
Client Manager uses the Desktop Management Interface (DMI) standard
established by the Desktop Management Task Force (DMTF).
Note:
Intel LANDesk Client Manager continuously
monitors your system for optimal system performance. This
monitoring function interrupts the auto suspend feature that
invokes after 30 minutes of inactivity.
If you install Intel’s LANDesk Client Manager, the NEC
Versa auto suspend feature may be disabled.
Set up the LANDesk Client Manager software on your NEC Versa using the
easy-to-follow setup program. Follow these installation suggestions when
installing LANDesk Client Manager.
„
To install on a user’s system, run Client setup, only.
„
To install on a system administrator’s system, run Client setup first, then
run Administration setup. Installing both components enables the
administrator to monitor his/her own system, as well as, all network
systems. To monitor network systems only, run Administration setup,
only.
If you use the NEC Versa system with the NEC Versa Dock and want to install
LANDesk Client/Admin Manager, you must load the applicable software before
docking the system.