NEC Versa LX, Инструкция по обслуживанию и справочник

Страница: 70 / 138

3-14 Disassembly and Reassembly
4.
Disconnect the VersaGlide cable from connector P11 (next to the dip
switches) and speaker assembly cable from connector P10. Both are located
on the main board.
5.
Carefully separate and lift the front cover from the bottom assembly, starting
on the right and working left.
At this point in the disassembly sequence you can remove the speaker assembly,
VersaGlide assembly or LCD panel latch switch assembly, if necessary. If these
items do no need replacing, skip the next section.
Speaker Assembly, VersaGlide Assembly, LCD Panel Latch Switch Assembly
1.
Position the front cover assembly as shown in the following illustration.
A – Speaker Assembly Screws
2.
Remove the screws and lift the speaker assembly from the front cover
assembly.
VersaGlide Assembly
Remove the VersaGlide and cable assembly instructions as follows.
1.
Disconnect the LCD panel switch cable from connector CP16 (
A
) on the
VersaGlide assembly.
2.
Remove the four screws (
B
).